Schroeder AUv3 Reverb3.0.2 - App Store
Sie können Ergebnisse sehen in einige Sekunden.
Herausgeberbeschreibung
reeze, temposynchrones Pre-Delay. AUv3 und Standalone. Schroeder ist ein Hallgerät, das sich auf das Wesentliche beschränkt: Raum wählen, drei Regler einstellen, spielen. Namensgeber ist Manfred Schroeder, der 1962 den ersten digitalen Hallalgorithmus beschrieb, und genau dieser Algorithmus ist der erste Raum auf dem Wahlschalter.
SIEBEN RÄUME
• Schroeder: der klassische Entwurf von 1962, vier Kammfilter und zwei Allpässe pro Seite, mit dem Klang von Schroeder 2.x.
• Spring: drei dispersive Delay-Schleifen mit Sättigung und leichtem Eiern.
• Booth, Room und Stage: Plattenhall nach der Dattorro-Topologie, von eng bis weit.
• Hall und Cathedral: ein Feedback-Delay-Netzwerk mit acht Linien für lange, glatte Fahnen.
Der Wet-Pegel ist über alle Räume hinweg angeglichen, und beim Umschalten wird die Hallfahne überblendet, sodass keine Knackser entstehen.
VIER VARIATIONEN
Normal, Dark, Bright und Chorale formen jeden Raum um. Dark verkürzt das Ausklingen der Höhen, Bright verlängert es, und Chorale legt einen dreistimmigen Ensemble-Chorus auf den Wet-Pfad. Das Direktsignal bleibt stets unangetastet.
DREI REGLER
• Mix: Dry/Wet-Überblendung mit konstanter Leistung, dazu ein Bypass-Taster auf der MIX-Pille.
• Pre-Delay: 0 bis 250 ms oder temposynchron von 1/64 bis 1/2, mit punktierten und triolischen Werten.
• Decay: 50 % entspricht der natürlichen Hallzeit des Raums, höhere Werte dehnen die Fahne bis auf das Dreifache, und bei 100 % friert sie ein, während der Eingang offen bleibt. Der Schroeder-Raum behält seine Sekundenskala aus 2.x, bis 60 s.
BERNSTEINFARBENES LCD
Die Wahlschalter für Raum und Variation sitzen auf einem bernsteinfarbenen Punktmatrix-Display mit einem Echtzeit-Spektrumanalysator je Kanal. Wahlschalter und Regler reagieren auf Wisch- und Scrollgesten.
SURROUND
Mono, Stereo, 5.1, 7.1 und 7.1.2 Spatial Audio, wobei die Spektrumanzeigen von allen Kanälen gespeist werden.
SESSIONS AUS SCHROEDER 2.X
Projekte, die mit Schroeder 1.x oder 2.x gespeichert wurden, laden wie gewohnt: Mix und Decay werden automatisch auf die neue Engine übertragen.
AUV3 + STANDALONE
Läuft eigenständig oder in GarageBand, Logic Pro für iPad, AUM, Cubasis und jedem AUv3-Host. Das Fenster lässt sich frei skalieren, die gesamte Oberfläche wächst mit.
Über Schroeder AUv3 Reverb
Das Unternehmen, das Schroeder AUv3 Reverb entwickelt, ist DiscoDSP LLC. Die neueste vom Entwickler veröffentlichte Version ist 3.0.2.
Um Schroeder AUv3 Reverb auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2026-09-24 auf unserer Website gelistet und wurde 0 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann Schroeder AUv3 Reverb als Malware erkennen, wenn der Download-Link defekt ist.
So installieren Sie Schroeder AUv3 Reverb auf Ihrem iOS-Gerät:
- Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
- Sobald Schroeder AUv3 Reverb im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
- Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
- Nachdem Schroeder AUv3 Reverb heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
- Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.
Programmdetails
Systemanforderungen
Download-Informationen
Preisgestaltung
Versionsgeschichte
Version 3.0.2
veröffentlicht am 2026-09-24
DSP-Optimierung.
Version 3.0.2
veröffentlicht am 2026-10-13
Version History DSP optimization. 3.0.2 Sep 24 Added iOS 27 compatibility. 3.0.1 Sep 17 Version 3.0 is a full rewrite of the desktop reverb: seven spaces, four variations, tempo-synced pre-delay, freeze, per-channel spectrum displays and surround support, running as Standalone and AUv3. 3.0 Sep 1 New 8x oversampling implementation significantly enhancing the Schroeder reverb's audio quality by eliminating digital artifacts and aliasing from the saturation and filtering stages, while preserving the efficiency of the core reverb algorithm. This results in smoother, more analog-like saturation characteristics and cleaner frequency response, delivering a more natural and professional reverb sound that rivals high-end hardware units without affecting existing presets or workflow.
Added percentage display for mix parameter and seconds with intelligent precision for decay parameter. 2.0 05/20/2025 Fixed the issue where the AUv3 extension was unavailable.
Implemented a default window size of 400x240 when loaded on the AUM app.
Fixed a bug in the stereo processing code where the left and right channels were not processed independently, and every other sample was ignored.
Rectified a potential out-of-bounds read when the buffer size is not a multiple of 2.
Modified the mix behavior to make it transparent to incoming audio.
Compensated for the perceptible decay time changes resulting from the stereo bug fix. 1.7 03/14/2023 Added IIR 48 dB pole 20 Hz high-pass and 22 Khz low-pass filter for cleaner sound and removing unwanted high frequencies.
Added waveshaper limiter to avoid excessive reverb boost adding a crunchy sound when signal is saturated.
Framework update for enhanced stability. 1.6 03/13/2023 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 1.2 09/24/2021 1.1 08/13/2020
Version 3.0.2
veröffentlicht am 2026-09-25
Version History DSP optimization. 3.0.2 14h ago Added iOS 27 compatibility. 3.0.1 Sep 17 Version 3.0 is a full rewrite of the desktop reverb: seven spaces, four variations, tempo-synced pre-delay, freeze, per-channel spectrum displays and surround support, running as Standalone and AUv3. 3.0 Sep 1 New 8x oversampling implementation significantly enhancing the Schroeder reverb's audio quality by eliminating digital artifacts and aliasing from the saturation and filtering stages, while preserving the efficiency of the core reverb algorithm. This results in smoother, more analog-like saturation characteristics and cleaner frequency response, delivering a more natural and professional reverb sound that rivals high-end hardware units without affecting existing presets or workflow.
Added percentage display for mix parameter and seconds with intelligent precision for decay parameter. 2.0 05/20/2025 Fixed the issue where the AUv3 extension was unavailable.
Implemented a default window size of 400x240 when loaded on the AUM app.
Fixed a bug in the stereo processing code where the left and right channels were not processed independently, and every other sample was ignored.
Rectified a potential out-of-bounds read when the buffer size is not a multiple of 2.
Modified the mix behavior to make it transparent to incoming audio.
Compensated for the perceptible decay time changes resulting from the stereo bug fix. 1.7 03/14/2023 Added IIR 48 dB pole 20 Hz high-pass and 22 Khz low-pass filter for cleaner sound and removing unwanted high frequencies.
Added waveshaper limiter to avoid excessive reverb boost adding a crunchy sound when signal is saturated.
Framework update for enhanced stability. 1.6 03/13/2023 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 1.2 09/24/2021 1.1 08/13/2020
Version 3.0.1
veröffentlicht am 2026-09-18
Version History Added iOS 27 compatibility. 3.0.1 9h ago Version 3.0 is a full rewrite of the desktop reverb: seven spaces, four variations, tempo-synced pre-delay, freeze, per-channel spectrum displays and surround support, running as Standalone and AUv3. 3.0 Sep 1 New 8x oversampling implementation significantly enhancing the Schroeder reverb's audio quality by eliminating digital artifacts and aliasing from the saturation and filtering stages, while preserving the efficiency of the core reverb algorithm. This results in smoother, more analog-like saturation characteristics and cleaner frequency response, delivering a more natural and professional reverb sound that rivals high-end hardware units without affecting existing presets or workflow.
Added percentage display for mix parameter and seconds with intelligent precision for decay parameter. 2.0 05/20/2025 Fixed the issue where the AUv3 extension was unavailable.
Implemented a default window size of 400x240 when loaded on the AUM app.
Fixed a bug in the stereo processing code where the left and right channels were not processed independently, and every other sample was ignored.
Rectified a potential out-of-bounds read when the buffer size is not a multiple of 2.
Modified the mix behavior to make it transparent to incoming audio.
Compensated for the perceptible decay time changes resulting from the stereo bug fix. 1.7 03/14/2023 Added IIR 48 dB pole 20 Hz high-pass and 22 Khz low-pass filter for cleaner sound and removing unwanted high frequencies.
Added waveshaper limiter to avoid excessive reverb boost adding a crunchy sound when signal is saturated.
Framework update for enhanced stability. 1.6 03/13/2023 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 1.2 09/24/2021 1.1 08/13/2020
Version 3.0
veröffentlicht am 2026-09-11
Version History Version 3.0 is a full rewrite of the desktop reverb: seven spaces, four variations, tempo-synced pre-delay, freeze, per-channel spectrum displays and surround support, running as Standalone and AUv3. 3.0 Sep 1 New 8x oversampling implementation significantly enhancing the Schroeder reverb's audio quality by eliminating digital artifacts and aliasing from the saturation and filtering stages, while preserving the efficiency of the core reverb algorithm. This results in smoother, more analog-like saturation characteristics and cleaner frequency response, delivering a more natural and professional reverb sound that rivals high-end hardware units without affecting existing presets or workflow.
Added percentage display for mix parameter and seconds with intelligent precision for decay parameter. 2.0 05/20/2025 Fixed the issue where the AUv3 extension was unavailable.
Implemented a default window size of 400x240 when loaded on the AUM app.
Fixed a bug in the stereo processing code where the left and right channels were not processed independently, and every other sample was ignored.
Rectified a potential out-of-bounds read when the buffer size is not a multiple of 2.
Modified the mix behavior to make it transparent to incoming audio.
Compensated for the perceptible decay time changes resulting from the stereo bug fix. 1.7 03/14/2023 Added IIR 48 dB pole 20 Hz high-pass and 22 Khz low-pass filter for cleaner sound and removing unwanted high frequencies.
Added waveshaper limiter to avoid excessive reverb boost adding a crunchy sound when signal is saturated.
Framework update for enhanced stability. 1.6 03/13/2023 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 1.2 09/24/2021 1.1 08/13/2020
Version 3.0
veröffentlicht am 2026-09-04
Version History Version 3.0 is a full rewrite of the desktop reverb: seven spaces, four variations, tempo-synced pre-delay, freeze, per-channel spectrum displays and surround support, running as Standalone and AUv3. 3.0 2d ago New 8x oversampling implementation significantly enhancing the Schroeder reverb's audio quality by eliminating digital artifacts and aliasing from the saturation and filtering stages, while preserving the efficiency of the core reverb algorithm. This results in smoother, more analog-like saturation characteristics and cleaner frequency response, delivering a more natural and professional reverb sound that rivals high-end hardware units without affecting existing presets or workflow.
Added percentage display for mix parameter and seconds with intelligent precision for decay parameter. 2.0 05/20/2025 Fixed the issue where the AUv3 extension was unavailable.
Implemented a default window size of 400x240 when loaded on the AUM app.
Fixed a bug in the stereo processing code where the left and right channels were not processed independently, and every other sample was ignored.
Rectified a potential out-of-bounds read when the buffer size is not a multiple of 2.
Modified the mix behavior to make it transparent to incoming audio.
Compensated for the perceptible decay time changes resulting from the stereo bug fix. 1.7 03/14/2023 Added IIR 48 dB pole 20 Hz high-pass and 22 Khz low-pass filter for cleaner sound and removing unwanted high frequencies.
Added waveshaper limiter to avoid excessive reverb boost adding a crunchy sound when signal is saturated.
Framework update for enhanced stability. 1.6 03/13/2023 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 1.2 09/24/2021 1.1 08/13/2020
Version 2.0
veröffentlicht am 2026-08-22
Version History New 8x oversampling implementation significantly enhancing the Schroeder reverb's audio quality by eliminating digital artifacts and aliasing from the saturation and filtering stages, while preserving the efficiency of the core reverb algorithm. This results in smoother, more analog-like saturation characteristics and cleaner frequency response, delivering a more natural and professional reverb sound that rivals high-end hardware units without affecting existing presets or workflow.
Added percentage display for mix parameter and seconds with intelligent precision for decay parameter. 2.0 05/20/2025 Fixed the issue where the AUv3 extension was unavailable.
Implemented a default window size of 400x240 when loaded on the AUM app.
Fixed a bug in the stereo processing code where the left and right channels were not processed independently, and every other sample was ignored.
Rectified a potential out-of-bounds read when the buffer size is not a multiple of 2.
Modified the mix behavior to make it transparent to incoming audio.
Compensated for the perceptible decay time changes resulting from the stereo bug fix. 1.7 03/14/2023 Added IIR 48 dB pole 20 Hz high-pass and 22 Khz low-pass filter for cleaner sound and removing unwanted high frequencies.
Added waveshaper limiter to avoid excessive reverb boost adding a crunchy sound when signal is saturated.
Framework update for enhanced stability. 1.6 03/13/2023 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 1.2 09/24/2021 1.1 08/13/2020
Version 2.0
veröffentlicht am 2025-05-20
May 20, 2025
Version 2.0
New 8x oversampling implementation significantly enhancing the Schroeder reverb's audio quality by eliminating digital artifacts and aliasing from the saturation and filtering stages, while preserving the efficiency of the core reverb algorithm. This results in smoother, more analog-like saturation characteristics and cleaner frequency response, delivering a more natural and professional reverb sound that rivals high-end hardware units without affecting existing presets or workflow.
Added percentage display for mix parameter and seconds with intelligent precision for decay parameter.
Version 2.0
veröffentlicht am 2025-05-20
New 8x oversampling implementation significantly enhancing the Schroeder reverb's audio quality by eliminating digital artifacts and aliasing from the saturation and filtering stages, while preserving the efficiency of the core reverb algorithm. This results in smoother, more analog-like saturation characteristics and cleaner frequency response, delivering a more natural and professional reverb sound that rivals high-end hardware units without affecting existing presets or workflow.
Added percentage display for mix parameter and seconds with intelligent precision for decay parameter.
Version 1.7
veröffentlicht am 2023-03-14
Mar 14, 2023
Version 1.7
Fixed the issue where the AUv3 extension was unavailable.
Implemented a default window size of 400x240 when loaded on the AUM app.
Fixed a bug in the stereo processing code where the left and right channels were not processed independently, and every other sample was ignored.
Rectified a potential out-of-bounds read when the buffer size is not a multiple of 2.
Modified the mix behavior to make it transparent to incoming audio.
Compensated for the perceptible decay time changes resulting from the stereo bug fix.
Haftungsausschluss
Offizieller App Store-Link
Wir hosten Schroeder AUv3 Reverb nicht auf unseren Servern. Wir haben es nicht auf Viren, Adware, Spyware oder andere Arten von Malware gescannt. Diese App wird von Apple gehostet und hat deren Allgemeine Geschäftsbedingungen erfüllt, um dort gelistet zu werden. Wir empfehlen Vorsicht bei der Installation.
Der App-Store-Link für Schroeder AUv3 Reverb wird Ihnen von apps112.com ohne jegliche Zusicherungen, Gewährleistungen oder Garantien zur Verfügung gestellt, greifen Sie daher auf eigene Gefahr darauf zu.
Bei Fragen zu dieser speziellen App wenden Sie sich bitte direkt an den Herausgeber. Bei Fragen zu den Funktionalitäten von apps112.com kontaktieren Sie uns.
